|
|
|
|
More Height in Less Floor SpaceThe HD-9STX is your 9,000-lb. rugged lifting solution for when you need get something heavy and high, but you don't have a lot of space on the ground. Perfect for vehicle storage and service—in the shop or garages with high ceilings. Whether you're a service professional or a DIY'er, BendPak’s got the right lift for you. This model is available with optional casters, drip-trays, jack platform and more. With more height to work with, this lift does something others do not: it fits trucks and SUVs in the lower level. This is essential for parking purposes, especially if your lower-level vehicle is too heavy for the runways. A high-rise lift also increases the comfort of techs working underneath. Pulling transmissions and draining oil is safer and easier on high-rise car lift. The HD-9STX eliminates stooping and awkward straining when accessing the vehicle underbody. When you’re uncomfortable, you’re more likely to make mistakes, and there’s nothing better than a car lift that lifts to the perfect height. The HD-9STX maximizes versatility in a car lift that adapts to your height and lifestyle. The narrow designs fits in the same floor space as the HD-9ST but requires a bit more ceiling height to fully enjoy.
CapacityLifting Capacity* 9,000 lbs. (4,082 kg) *Max Capacity / Front Axle 4,500 lbs. (2,041 kg) *Max Capacity / Rear Axle 4,500 lbs. (2,041 kg) RiseA - Min. Runway Height: 4.5" (114 mm) B - Max. Rise: 82" (2,083 mm) C - Max. Lifting Height: 86.5" (2,197 mm) Time to Full Rise: 50 seconds Outside DimensionsD - Overall Width: 100.25" (2,546 mm) E - Outside Length: 198" (5,029 mm) F - Overall Length: 224" (5,690 mm) G - Height of Columns: 100" (2,540 mm) Inside DimensionsH - Width Between Columns: 89.75" (2,280 mm) I - Drive-Thru Clearance: 76.5" (1,943 mm) RunwaysJ - Runway Width: 19" (483 mm) K - Length of Runways: 188" (4,775 mm) L - Width Between Runways: 37.5" (953 mm) M - Runway Centerline: 56.5" (1,435 mm) N - Outside Edge of Runways: 75.5" (1,918 mm) Minimum WheelbaseRated Capacity: 135" (3,429 mm) 75% Capacity: 115" (2,921 mm) 50% Capacity: 95" (2,413 mm) 25% Capacity: 80" (2,032 mm)
One Year Limited Warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
Features and Comparison
- 9,000-lb. maximum lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
- Freestanding design
- Narrow-width
- High-rise
- Perfect for parking, storage and service
- Runways accommodate narrow and standard vehicles
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- Features heavy-duty 3/8" aircraft cable
- Rugged 1.25" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Push-button pneumatic safety release
- Independent backup slack-cable safety latches
- Customizable power unit location
- Removable approach ramps for additional drive-under clearance
- Longer approach ramps for low-ground clearance vehicles
- Optional drive-thru ramps available
- Optional drip trays available
- Optional solid deck available to increase storage capacity
- Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
- ETL Approved
|
|
|
|
|
|
|
|
|