"/>
  • Selling and Servicing Automotive Equipment Since 1996

Navigate to the AES SALES LLC homepage

FREE SHIPPING
On Selected Products

You are here:Home > Lifts
Bendpak HDS-27
Bendpak HDS-27 - Image 1 of 0
Bendpak HDS-27 - Image 2 of 0
Bendpak HDS-27 - Image 3 of 0
Bendpak HDS-27 - Image 1 of 0
Bendpak HDS-27 - Image 2 of 0
Bendpak HDS-27 - Image 3 of 0
Bendpak HDS-27 - Image 4 of 0
Bendpak HDS-27 - Image 1 of 0
Bendpak HDS-27 - Image 2 of 0
Bendpak HDS-27 - Image 3 of 0
Bendpak HDS-27 - Image 4 of 0

Bendpak HDS27

0 Reviews
List Price: $30,000.00
$25,000.00
$22,370.00
Save $7,630.00!
Product Code: Bendpak-LIFT-HDS-27-19
CALL FOR AVAILABILITY
This product qualifies for FREE SHIPPING!

Description

Construction, Municipal and Commercial Vehicles Welcome

This is where our car lifts really step into the next level of lifting. While the HDS-18E is an entry-level lift in the medium-duty truck category, the HDS-27 is well-suited to take your business well beyond the needs of most private drivers. This garage lift brings you into the realm of construction equipment, commercial flatbed trucks, concrete mixers, garbage trucks, buses, etc.

Every BendPak four-post lift, regardless of lift capacity, is made to exacting standards and gets the job done without undue strain or pain on the equipment. When we rate a truck lift at 27,000 lbs., that means anything at or under that weight limit is a cinch for our lifts to handle. We superbly over-engineer everything, so you can keep the “biggest and baddest” commercial and municipal vehicles up to code and ready for the next great haul.

Extended runways

Longer runways accommodate a wide variety of vehicle wheelbases, allowing you to steer massive trucks and buses onto our ramps without damaging your vehicle chassis.

Dual-hub cable sheaves

We take the time, cost and effort to bring you the best. Each sheave contained within the runway and cross tubes is a massive 12” in diameter, and the sheave axles, at 4” in diameter, greatly extend the lifespan of your lift by reducing the overall wear put on these parts. Manufacturing sheave components are even bigger than ones offered by our competition, which ensures superior quality in our product. Additionally, BendPak parts always meet or exceed ALI standards for load bearing and safety.

Heavy-duty aircraft cable

Each of the four, 1/2” diameter, 6 x 25 galvanized lifting cables has a 14,000-lb. breaking strength, so a four-post lift as massive as this has the engineering to keep your vehicles safe at all times, especially during periods of heavy use. They won’t rust out or break apart due to bad weather, chemicals or random, floating garage particulate.

Built-in lubrication

The sheaves and sheave axles are fitted with grease nipples to lubricate the parts as they move. This is an essential feature that is also a form of auto-maintenance, so you have little to do during your periodic service checks.

Flow restrictor

This truck lift provides the best that modern hydraulic technology has to offer. Integrated into the hydraulic cylinder is a flow restrictor that provides a safe, slow descent. This is true even in the extremely rare occurrence of a burst or ruptured hydraulic hose.

Large base plates

Substantial 12" x 12" base plates support the massive columns.

Spring-loaded safety locks

When the HDS-27 truck lift rises, spring-loaded safety locks engage the moving platforms. Safety ladders are standard and can be adjusted to keep the runways level, which is especially useful for sloped floors.

Push-button pneumatic lock release

The steel and aluminum pneumatic cylinders are aircraft-quality and certified to last for years without service. Lowering the lift release off the locks is done with one push against the pneumatic lock release. Just another simple way we put you in total control of your lift operations.
Secondary lock system

Two locks are better than one! A secondary slack-cable lock engages in case of cable failure, which is unlikely to occur. Still, we prepare our heavy-duty lifts for the worst to keep you working at your best.

Integrated design

Tucked safely into the structure of the four-post lift columns, our lifting cables, airlines, safety latches and cable sheaves are kept away from inclement weather, hazardous chemical erosion and garage dirt/debris. The column structure is the safest and most logical place to conceal the working parts of the lift. Internally routed parts are also crucial to creating the beautiful BendPak aesthetic our customers have come to know and love!

Features and Comparison

  • 27,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Supersized 12" diameter cable sheaves
  • Galvanized lifting cables
  • Grease nipples
  • Single hydraulic under-runway cylinder
  • Integrated flow restrictor
  • Durable powder coat
  • Spring-loaded safety locks
  • Second lock system on constant guard
  • Fully enclosed lifting cables
  • Multiple adjustable height locking positions
  • Maintenance-free electric hydraulic power system
  • Conveniently positioned operator controls
  • 12" x 12" base plates
  • Optional rolling jack

TechnicalSpecs

Capacity

Lifting Capacity*
27,000 lbs. (12,247 kg)
*Max Capacity / Front Axle
13,500 lbs. (6,123 kg)
*Max Capacity / Rear Axle
13,500 lbs. (6,123 kg)

Rise

A - Min. Runway Height:
8.5" (216 mm)
B - Max. Rise:
60" (1,524 mm)
C - Max. Lifting Height:
68.5" (1,740 mm)
Time to Full Rise:
75 seconds

Outside Dimensions

D - Overall Width:
154" (3,912 mm)
E - Outside Length:
257" (6,528 mm)
F - Overall Length:
312.5" (7,938 mm)
G - Height of Columns:
93" (2,362 mm)

Inside Dimensions

H - Width Between Columns:
134" (3,404 mm)
I - Drive-Thru Clearance:
109" (2,769 mm)

Runways

J - Runway Width:
22" (559 mm)
K - Length of Runways:
249" (6,325 mm)
L - Width Between Runways:
38" (965 mm) or 56" (1,422 mm)
M - Runway Centerline:
60" (1,524 mm) or 78" (1,981 mm)
N - Outside Edge of Runways:
82" (2,083 mm) or 100" (2,540 mm)

Minimum Wheelbase

Rated Capacity:
185" (4,699 mm)
75% Capacity:
160" (4,064 mm)
50% Capacity:
135" (3,429 mm)
25% Capacity:
110" (2,794 mm)

Locking

Locking Positions:
9
Lock Spacing:
Every 6" / 152 mm

Power Unit

Motor:
220 VAC / 60 Hz. 1Ph.
Noise:
45 dB

Shipping

Weight:
6,109-lbs. (2,770 kg)
Dimensions:
266'' x 27'' x 35'' (6,756 mm x 685 mm x 889 mm)

Warranty

One Year Limited warranty

Related Products

Bendpak 10APX
List Price: $7,780.00
$6,999.00
$6,095.00
Bendpak 10APX
List Price: $7,780.00
$6,999.00
$6,095.00
Bendpak 10AP
List Price: $6,299.00
$5,999.00
$5,795.00
Challenger AR4015EAO
List Price: $47,416.69
$42,800.00
$28,920.00
Bendpak 10APX
List Price: $7,780.00
$6,999.00
$6,095.00
Bendpak 10AP
List Price: $6,299.00
$5,999.00
$5,795.00
Challenger AR4015EAO
List Price: $47,416.69
$42,800.00
$28,920.00
BendPak lift, heavy-duty lift, Lifts, challenger lift, Forward lift, four post lift, alignment lifts, trucks, auto equipment, tire changers, balancers, rotary lift, automotive lift, challenger two post lift, two post lift, challenger CL12, car lifts
List Price: $44,131.00
$39,856.00
$28,677.52

Reviews

Average Customer Review:
( 0 )